Steffen Kroehnert
President and Founder
ESPAT-Consulting - Steffen Kroehnert

Biography
Steffen Kroehnert is President & Founder of ESPAT-Consulting based in Dresden, Germany. He is providing a wide range of consulting services around Semiconductor Packaging, Assembly, and Test, mainly for customers in Europe. Until June 2019, he worked for more than 20 years in different R&D, engineering, and management positions at large IDMs and OSATs in Germany and Portugal, namely Siemens Semiconductors, Infineon Technologies, Qimonda, NANIUM and Amkor Technology, where he most recently served as Senior Director Technology Development. Since 2016 Steffen has chaired the European SEMI integrated Packaging, Assembly, and Test - Technology Community (ESiPAT-TC). Steffen has authored or co-authored 23 patent filings and many technical papers in the field of Packaging Technology. He also co-edited the book “Advances in Embedded and Fan-Out Wafer Level Packaging Technologies”. He is an active member of several technical and conference committees of IEEE EPS, IMAPS, SEMI Europe, and SMTA. Steffen holds an M.Sc. in Electrical Engineering and Microsystems Technologies from the Technical University of Chemnitz, Germany.

Packaging in Europe - Micro Balling on Chips with a High Ball-count for Space Applications - an Extension of the Process Capabilities at AEMtec

Dan Negrea
SVP New Technologies
AEMtec GmbH

Abstract
Packaging in Europe – and not in Asia - seems a strange business model. But it is not, if you consider the technology IP aspects, the challenges, the drive of some European industries (mainly the space industry) towards emancipation from the dominance of the US and Asian providers. AEMtec started the internalization of the Wafer Back End solder balling technologies for 4 years and increased permanently the portfolio of customers and products, mainly in the high sensitivity products, considered by our European customers and strategically critical to their business. The vision of a one-stop-shop for core technology products, for small and medium quantities became reality. The requirements specific to the "New space" projects target in the first line the cost reduction of all components but without compromising on the required quality and performance.The drive to miniaturization, considering the costs of the payload for satellites, leads to the use of chips with a high Ball count (whereby 5000 and more are rather the rule than the exception).We like to focus in our presentation on the challenges, both from a technical as well as from a regulatory perspective for the use of the non-hermetic, soldered, flip chip technology for space applications on the technological, down-to-earth, explanations concerning the implementation of the wafer back end processes. AEMtec actively participates in different projects and workgroups around ESA.By qualifying in house processes, having extremely stringent requirements in terms of reliability, AEMtec can guarantee very high Cpk levels for all relevant processes, followed in the SPC. The level of quality which needs to be achieved for the space applications, opens the way to multiple other types of applications, including high density large size chips for companies active in the detection technology, but also for applications in the automotive industry. So far the achieved performances of the wafer back end solder bumping line, which comprises all the necessary stages of the process, from wafer inspection to balling, washing, dicing, and which has been validated on multiple tens of thousands of chips, allow the use of micro balls with a diameter of 50 µm, on chips with up to 12,000 connections. Of course this miniature size of balls and the physical size of the chips cause a high unitary stress/strain on the balls, due to the difference in thermal coefficient in normal use - therefore the major importance of the cleanness and of the underfill processes. The tests performed for the qualification go far beyond the normal RTV cycles, thus guaranteeing a flawless quality.

Biography
For information purposes only

Challenges for Heterogeneous Integration in Package – Applications driving Materials and Processes towards Diversity

Thorsten Meyer
Lead Principal Engineer
Infineon Technologies

Abstract
ABSTRACT Challenges for Heterogeneous Integration in Package –Applications driving Materials and Processes towards Diversity by Thorsten Meyer and Klaus PresselInfineon Technologies AG, Regensburg Heterogeneous Integration is a major technology driving force for microelectronic systems. More-than-Moore (MtM), System-in-Package (SiP), as well as 3D high-density integration technologies are a prerequisite for enabling the design of compact microelectronic devices. Heterogeneous Integration refers to the integration of separately manufactured components into a higher level of assembly, which is providing enhanced functionality and operating characteristics. In this definition, components should be taken to mean any unit, whether individual die, MEMS or sensor device, passive component and assembled package or sub-system, that are integrated into a single package (see e.g. Heterogeneous Integration Roadmap published for the first time October 2019). The requirements for integration of the mentioned components are differing strongly depending on application. Integration of power devices requires thick copper with large area connections for thermal properties and current carrying capabilities, e.g. a solution for vertical current flow. For mm-wave applications, precise knowledge of material parameters and dimensions is required to fabricate leading edge devices like radar or LIDAR for future autonomous driving. Logic integration typically requests for many short interconnects, fine line spaces and tight pad pitches in a horizontal arrangement of the contacts. MEMS and sensor devices often require a special protection and are sensitive in handling during production. Packaging often is customized to the application. In addition, the integration of passives, e.g. resistors, inductors, capacitors, as well as shielding capabilities or antennas require special packaging building blocks for an application tailored integration. All these different constraints lead to an extreme diversity of package solutions very difficult to tackle.In this presentation, we will discuss the challenges and introduce potential solutions for different integrated applications. We will highlight the importance of virtual prototyping, chip-package-board/system co-design as well as reliability prediction, which require detailed understanding of material properties and their interfaces. Especially, we will emphasize the increasing importance of knowledge on material physics. For example, investing into physics of advanced failure analysis is a major enabler for faster and more reliable development of innovative devices. We will show examples of building blocks for different areas of integration, which we must develop for the supply of integrated packages for future applications. Heterogeneous integration combined with miniaturization capability, i.e. more functionality in smaller volume, will drive us in future microelectronics.

Biography
Thorsten Meyer is Lead Principal Engineer Package Concept Engineering at Infineon Technologies in Regensburg, Germany, responsible for New Package concepts. Until March 2015 he was leading the Package Technology and Innovation department at Intel Mobile Communications (IMC) in Regensburg. Prior joining IMC, he was overall project leader for the development of Wafer Level Packaging Technologies at Infineon in Regensburg and earlier in Dresden.Thorsten is author of multiple publications and holds more than 150 patents and patent applications in the area of advanced packaging.

Flip-Chip Scale Package(FCCSP) Process Characterization and Reliability of Coreless Thin Package with 7nm TSMC Si

Eduardo De Mesa
Package Engineer
Intel Deutschland GmbH

Abstract
Advanced silicon nodes are continuously pushing the cutting edge of assembly technology for coreless thin packages used in mobile and electronic products to allow better power delivery, electrical performance, and higher routing capability. This results in a higher number of I/O and integration flexibilities. Furthermore, integration of a large die size in a smaller package with finer bump and ball pitches, increases the reliability risk. Also, typical mobile applications require stacking a memory die within the package without increasing the total package height. These combinations magnify the stress on back-end-of line (BEOL) stack and bump interconnection-especially on a thin coreless substrate which greatly influence extreme low-K dielectrics (ELK) fragility.This paper describes the qualification of the 7nm silicon (Si) BEOL stability on thin coreless embedded trace substrate (ETS) with smaller solder ball pitch and a high die to package aspect ratio. In our previous experience, coreless material is generally prone to warpage due to absence of the core that supports the package rigidity. Therefore, controlling and minimizing warpage at room and elevated temperature is crucial, as the stress propagates into the BEOL, resulting in a significant impact on the chip reliability, especially for ELK structures. Simulation of thermal and mechanical stress in Finite Element Modeling (FEM) was completed to confirm warpage behavior. Shadow Moiré was documented under temperature loading and package coplanarity empirical data was collected.Within the development phase, the package warpage was successfully reduced and coplanarity on thin coreless substrate was within specification. Significant improvement is attributed to mold compound higher coefficient of thermal expansion (CTE) and lower elastic modulus. Multiple reliability tests in accordance with JEDEC standard was conducted. Results confirmed the BEOL stack integrity and all related tests passed.

Biography
Eduardo De Mesa received B.S Mechanical Engineering from Mapua Institute of Technology, Manila, Philippines. Currently, working under Technology Enablement Group engaged in advanced package development at Intel Deutschland Gmbh.

Active Mold Packaging for Novel Antenna-in-Package Interconnection and Manufacturing

Florian Roick
Business Development Active Mold Packaging
LPKF Laser & Electronics AG

Abstract
IC package designers wishing to benefit from space saving Antenna-in-Package (AiP) technologies rely on an intricate selection of materials and interconnect processes to produce a self-contained integrated module. This paper presents a new way to reduce the production complexities of AIP by introducing a novel homogeneous packaging technology: Active Mold Packaging (AMP). Active Mold Packaging directly establishes electrical connections, such as patch antennas, signal vias, and Electro-Magnetic-Interference (EMI) shields for RF applications on the surface and in the volume of the encapsulating Epoxy Mold Compound (EMC). Advancing the development of multifunctional compact devices, AMP in essence transforms the passive and undeveloped real-estate of the EMC into an active carrier of package functionality.A 2.5D interconnect technology to simplify AiP designs and EMI shielding will be presented. AMP integrates familiar process steps: molding of EMCs, Laser Direct Structuring and direct electro-less and galvanic plating. In combination the processing steps result in a robust scalable manufacturing solution, AMP. AMP is uniquely suited for the production of AiP but also a foundation design platform for other novel IC packages.Critical process attributes of AMP are discussed and used to propose a commercial AMP-AiP model. Measuring the influence of key design elements of an AMP fabricated EMC micro strip antenna and EMI shield within the 5G radio frequencies; sub-6GHZ, mm-wave, and beyond 5G (« B5G ») ISM bands yields strategies for implementing the AMP technology. Consideration is granted to the impact of the LDS activator, the laser structuring parameters, and electroless plating factors on the model devices. Lastly, the proposed commercialization of the AMP-AiP is modelled through a cost-model comparison.

Biography
M. Sc. Florian Roick, Business Development Manager Active Mold PackagingBorn in 1981. He holds a degree as Bachelor of Science in Applied Physics from Dublin Institute of Technology. And a degree as Master of Science in Electrical Engineering with focus on laser systems, laser physics and microsystems engineering from Hochschule Bremen.Since 2006 employed at LPKF Laser & Electronics AG, until 2008 as application engineer for the StencilLaser business unit. Between 2008 and 2019 strategic product manager responsible for aligning the product portfolio with the needs and requirements of the PCB and SMT markets.Since 2019 Business Development Manager for LPKF’s Active Mold Packaging technology. That is to electrically functionalize the real-estate of the epoxy mold compound on the base of LPKF’s patented Laser Direct Structuring (LDS) technology.Co-inventor of the parametric stick-in and co-author of a variety of publications.

High Throughput & High Yield Heterogeneous Integration with Implemented Metrology for Collective D2W Bonding

Elisabeth Brandl
Business Development Manager
EVG

Abstract
Heterogeneous integration offers several advantages in performance gain, functionality increase as well as yield enhancement. Depending on the device architecture and level of integration, several integration methods at different manufacturing levels can be used to create heterogeneous integrated systems. Processing on die level is often practiced, leading in some cases to throughput and yield considerations. Collective die to wafer bonding can enable several integration processes on wafer level via using a reconstituted transfer carrier approach. Especially in hybrid and fusion bonding this method enables heterogeneous integration as processes such as plasma activation are better performed on wafer level for high throughput.As for all semiconductor processes, collective die to wafer bonding demands suited and optimized measurement solutions for process monitoring and yield optimization. Fitting metrology combined with a feedback loop for production equipment is essential to increase yield of the whole integration process and an important factor in successful heterogeneous integration. Regarding metrology implementation, two scenarios are generally possible. One is the implementation of metrology within the bond equipment, which allows a quick reaction and the process parameters can be directly adjusted. The consideration of such implementation demands throughput matching for high equipment efficiency. The other implementation method is an external metrology tool, where the feedback is delayed, but on the other hand one metrology tool can serve several production tools.In the presentation the process flow of collective die to wafer bonding will be discussed in more detail as well as the advantages and disadvantages of the two metrology implementation scenarios.

Biography
Elisabeth Brandl received her master in technical physics from the Johannes Kepler University Linz, Austria in Semiconductor and Solid State Physics. Since 2014, she has been responsible for Product Marketing Management for temporary bonding and metrology at EVG.

Vertical Stacking of Controller IC on a Copper Clip Attached on MOSFET as a Space-saving Solution for High Current Switch e-fuse Applications

Alastair Attard
Sr. Technical Program Manager & Assembly Business Development
United Test and Assembly Center Ltd

Abstract
Recently there has been an increasing demand for high-performance computing, mainly driven by data centers, online storage, cloud-based servers, and online software services. These applications require high computing power which drives high energy consumption, so the power systems employed need to run at extremely high efficiency and have small form factors, whilst offering very high reliability and minimal thermal losses during their deployment. This can be achieved by improving both the power semiconductor device technology, as well as the power packaging technology, such that maximum power performance and reliability can be extracted from the PCB area available.Power MOSFET technology has evolved to reduce switching losses and allow high frequency switching. Power modules have also been developed to integrate MOSFET dies together with a controller IC in a single package to offer a small form factor solution. From an interconnect perspective, copper clip bonding began to replace wire bonding technology due to the lower resistance and parasitic inductances it offers compared to wire bonding. Whereas most multi-die power module packages employ a side-by-side die configuration due to the wire bonding interconnect method, copper clip packages allow for vertical die stacking, which results in a smaller package for the same power rating.In this paper, we propose a QFN power module package solution for an electronic fuse (e-fuse) device in high-performance computing applications, comprised of a controller IC vertically stacked onto the copper clip used to create the interconnect between the MOSFET die and the lead frame. This approach provides a vertically integrated power module solution, offering a significantly reduced form factor versus a side-by-side power module approach or the use of two separate QFN packages for each die. Typical e-fuse applications need two separate QFN packages, for example, a 3mm x 3mm QFN for the controller IC and a 5mm x 6mm QFN for the MOSFET die, occupying a total of 39mm² of PCB area. Comparatively, a vertically stacked power module can be packaged in a 5mm x 5mm QFN occupying a total PCB area of 25mm², resulting in 36% less PCB area usage. The vertically stacked power module also offers excellent thermal performance despite the increased power density of the package. Thermal simulations performed using a 5mm x 6mm e-fuse package structure with 4.1W of combined power dissipation show that a Theta Ja of 25.3 ^oC/W and maximum temperatures of around 128.8^oC for the IC and 123.9^oC for the MOSFET are achieved under still air conditions.The assembly process flow will also be discussed in more detail, with focus on critical process steps such as vacuum reflow to ensure minimum voiding in the solder interconnects between MOSFET and lead frame, and copper clip and MOSFET. Examples of actual devices will also be shown. UTAC’s outlook on more advanced power modules will also be shared, showing proposals for packages with increased complexity using three dies and copper clips in a vertically stacked configuration for smart power stage applications with reduced footprint requirements.

Biography
Alastair Attard is Senior Technical Program Manager and Assembly Business Development at UTAC Group. He has a Bachelor’s degree in Mechanical Engineering and an Executive MBA from the University of Malta. He has over 14 years of experience in the assembly & test of semiconductor devices.Prior to joining UTAC, Alastair worked at STMicroelectronics Malta from 2006 until 2011, first as a Process Engineer on flip chip assembly for SiP and later as a Package Development Senior Engineer for SiP and MEMS packages. He later joined Besi in 2011, where he was Manager of the Process Development group until 2018. At UTAC, he is responsible for Technical Program Management and Assembly Business Development in the European region, with main focus on Automotive, Industrial, SiP, Power and MEMS areas.

New Solutions for Plasma Dicing, and New Solutions for Processing of SiC Wafers Ranging from Ingot Splitting, Grinding, Polishing to High Speed and Chipping Free Dicing

Gerald Klug
General Sales Manager
DISCO Hi-Tec Europe GmbH

Abstract
Wafer thinning (Kezuru and Migaku) and dicing (Kiru) is essential for advanced packaging, for achieving narrow street widths and for making thin dies for 3D-packaging. New solutions on plasma dicing in combination with latest tapes and grinding technology enable the supply of perfect top side, back side and side wall quality on dies in thickness range from 20 – 150 µm.Plasma dicing has various advantages comparing to the conventional dicing. However, during the plasma dicing process the sensitive wafer front can be at risk due to the surface being exposed to plasma gas. It is common to protect the wafer front surface by photoresist in the wafer fab, which increases the cost and the processing steps.DISCO has developed a special surface protection film and a total new processing flow for plasma dicing to overcome these issues. SiC is getting more and more important for the energy efficient devices. Since SiC is a very expensive material DISCO focuses on technologies for gaining as many as possible wafers and dies of outstanding quality out of it.SiC ingot splitting by KABRA:KABRA is a new method for SiC-ingot slicing by using a laser instead of a wire saw. In this process, a special layer is made inside of the ingot by laser irradiation and then the wafer is split from the ingot. 40% more wafers are obtained out of one ingot compared to conventional method.SiC ingot and wafer grinding and polishing:After splitting the wafer from the ingot, the ingot side and the wafer side need to be ground and polished. DISCO has developed grinding wheels and polishing pads (E Pad) suitable for wafer manufactures and device makers.SiC wafer dicing by blade or laser:To obtain more numbers of dies from a wafer, cutting streets can be reduced down to 50 µm and less. With our special technologies cutting speed and quality have been greatly improved, too.

Biography
Gerald Klug has studied business-engineering at the University of Siegen and graduated as Diplom-Engineer in 1998.He started his carrier as a designer and project engineer of steel cutting lines at a globally leading German machine manufacturing company.At the end of 2000, he joined DISCO as Sales Engineer. Meanwhile he has been working for DISCO for 19 years and is nowadays operating as General Sales Manager for the territory of Europe.

Virtual Prototyping for System-in-Package with Heterogeneous Integration - Enabler for faster Time-to-Market

Ghanshyam Gadhiya
Research Associate
Fraunhofer ENAS

Abstract
Heterogeneous Integration in System-in-Package (SiP) based on Fan-Out Wafer Level Technologies allows to meet various requirements such as improved performance, smaller form-factor, functional safety and low cost for upcoming new applications. Due to the thermo-mechanical stresses leading to device failure, the reliability risks must be assessed during the development of new products aiming for a design optimized for reliability. Virtual Prototyping (VP) based on Finite Element (FE) simulation allows the analysis of the thermo-mechanical situation during fabrication, tests and service within short time, allowing shorter development time. However, it requires parametric FE models, precise material and experimental data for validation. Because of this initial investment, it is advised to develop the VP schemes in a way that they are able to cover a wide variety of future products.The talk will present a modular system of parametric FE models that enables virtual reliability assessments of various SiP products based on Fan-Out Technologies such as WLSiP, eWLB-PoP, RCP, InFO, FOPLP, WFOP, SiWLP and SWIFT-PoP [1][2]. By combination of common packaging components like die, mold, redistribution layers, solder balls, vias, integrated passives, and boards from the library of pre-calibrated parametric FE models in ANSYS, digital twins of a large number of individual package configurations can readily be generated, e.g. 2D, 2.5D and 3D/PoP. The talk highlights the flexibility of the modular system of parametric FE models by four very different industrial packages: Radar sensor, Silicon photomultiplier, Automotive inertial sensor and Camera module. The VP scheme for a new pad design of a multi-chip SiP sensor is demonstrated in detail to show the great support that virtual optimization and qualification schemes can provide. They can reduce Time-to-Market of new SiP products by 50%-75%.References[1] https://doi.org/10.1109/ESTC.2018.8546352[2] https://doi.org/10.1115/1.4043341

Biography
Ghanshyam Gadhiya received his M.Sc. degree in Micro and Nano Systems, with a specialization in Finite element analysis of power module from Technical university of Chemnitz in 2013. Since 2014, he is working as a scientific researcher at the Micro materials center, Fraunhofer ENAS. His main research focus includes parametric finite element modelling, thermo-mechanical simulation and optimization of microelectronics packages using FE-program ANSYS. He has been also involved with several industrial projects for residual stress, humidity and vibrational analysis. His current research interests include fan-out wafer level packaging technology, system-in-package, virtual prototyping and micro-electronics failure analysis.

Innovative Packaging and Evaluation Approach for an Universal Sensor Platform

Carsten Brockmann
Group Manager Sensor Nodes and Embedded Microsystems
Fraunhofer Institut für Zuverlässigkeit und Mikrointegration

Abstract
This article presents an innovative packaging and evaluation approach for a newly developed Universal Sensor Platform (USEP) based on a system in package RISC-V integrated microcontroller with a top-level functionalized system in package design. Specific functions of the sensor platform are assigned to four different physical levels in the whole integration concept. The technical implementation of the functional requirements requires innovative, technological solutions in the packaging and interconnection technology (AVT) but also new approaches for testing methods and infrastructure across the different levels.Starting from a bare die, inclusion of package co-design, new assembly and interconnection techniques, up to the provision of the evaluation and testing of the platform system, the increasing complexity of this research projects in microelectronics becomes apparent.In the final step of finalizing the system in package solution, the sensors are applied to the functionalized package surface. This enables the system to directly measure various parameters such as temperature, humidity and pressure. The electrical connection of the components is done on a multilayer redistribution layer, which is applied to the mold material of the package and connected to the underlying system core with through package vias. For testing, a modular evaluation board is available, which allows the connection of an FPGA-based emulation environment. Furthermore, various test adapters can be connected to the data bus, thus significantly increasing the modular testability. A test socket detachable from the circuit board connects the manufactured modules with their 256-BGA footprint with all electrical operation and debug signals and plays a central role for the actual chip test because it enables short testing and configuration cycles.

Biography
Carsten Brockmann studied Technische Informatik at the Technical University of Berlin and received his diploma in 2008. He worked as a scientist at the Forschungsschwerpunkt Technologien der Mikroperipherik in the field of wireless sensor nodes until 2014 when he changed to Fraunhofer Institute for Reliability and Microintegration. In different national and international research projects he proceeded with his research work and became the group manager for sensor nodes and embedded microsystems in 2015.

Heterogeneous Integration - The New Driver of Innovation and Growth

Rozalia Beica
Chief Sales Officer, Semiconductor Division
AT&S

Abstract
The explosive growth in data generated and computing needs, global network traffic and digital transformation are further driving the adoption of electronics and semiconductor devices. The need for more performing and smarter devices, with increased functionalities, that can address high bandwidth needs, faster speeds, parallel processing, with more efficient power consumption is driving the industry to further develop new and innovative technologies. While innovation in mobile devices continues, new emerging applications, such as IoT, Artificial Intelligence and 5G are expected to drive the next phase of innovation across the supply chain. The new driving forces are also shifting the importance in the industry from technology node scaling to system level integration. This presentation will give an overview of the global market trends highlighting the majorindustry trends and applications, the increased need and growth of heterogeneous and system level integration and the solutions that AT&S is bringing to the market to address current and future market needs.

Biography
Rozalia Beica is currently the CSO of Semiconductor Division, focusing on semiconductor and module activities within AT&S. Prior to AT&S she had several executive and C-level roles with various organizations across the supply chain: electronic materials (Rohm and Haas Electronic Materials, Dow & DuPont), equipment (Semitool, Applied Materials and Lam Research), device manufacturing (Maxim IC) and market research & strategy consulting firm (Yole Developpement). Rozalia is actively involved in various industry activities. Some of the current engagements include: Member of the Board of Governors for IEEE Electronics Packaging Society and Vice General Chair of 71th ECTC, Chair of the Heterogeneous Integration Roadmap WLP Technical Working Group, Chair of the Semi Strategic Materials Conference, Technical Chair of System in Package China Symposium, Advisory Board Member 3DinCites and IMPACT Taiwan. Past activities: IMAPS VP of Technology, General Chair IMAPS DPC, Program Director EMC3D Consortia, General Chair Global Semi & Electronics Forum, Technical Advisory Board Member SRC, several other memberships in industry committees. Rozalia has over 150 presentations & publications, including 3 book chapters on 3D Integration. Rozalia has a M.Sc in Chemical Engineering (Romania), a M. Sc. In Management of Technology (USA) and a Global Executive MBA from IE Business School (Spain).

Enabling Assembly and Packaging Material Developments for Next Gen RF Devices, Antennas and Radars

Ruud de Wit
Business Development Manager EMEA
Henkel Belgium NV

Abstract
Smart Electronics’ market trends like 5G Telecom and Autonomous Driving are leading advanced semiconductor packaging innovations towards higher functionality, enhanced connectivity at higher frequencies, RF signal interference isolation (shielding), smaller form factors (miniaturization) and reduced power consumption. To meet these demands, semiconductor package designs continue to evolve towards MULTIPLE DIE using System-in-Package and Wafer Level architectures. Especially for next generation RF devices, antennas and radars, the thermo-mechanical, thermal resistance and (di)electric properties of the assembly and packaging materials play a key role as well as fast and low temperature processing/curing. This presentation will give an overview of the challenges and solutions from a semiconductor packaging material perspective based on recent customer experiences and ongoing developments to enable new designs. The focus will be on thermal performance of different die and lid attach assembly methods and thermal interface materials, EMI shielding effectiveness of thin silver layers, dielectric constant and loss factors of liquid wafer level encapsulants and underfills at 28-50 GHz and above, etc.

Biography
Ruud de Wit is responsible for managing Henkel's Semiconductor, Sensor & Consumer Electronics Assembly Materials business development within EMEA region. Ruud has a BSc degree in Mechanical Engineering followed by several polymer, sales and marketing courses. Ruud is working for Henkel since 1990 in multiple positions including technical customer support, quality assurance and engineering, and global semiconductor account and product management.

Development of a foil based flexible interposer for power conditioning IC in energy autarkic systems

Erwin Yacoub-George
Scientist
Fraunhofer EMFT

Abstract
The EU ECSEL project EnSO aims the development of autonomous micro energy sources (AMES) for innovative electronic devices that target key applications such as smart health, smart mobility and smart society. An AMES provides energy for sensors, data processing and data transmission and consists of micro storage element, energy harvester, smart charger and power conditioning IC. Smart integration of these building blocks to fabricate an AMES with an appropriate form factor was a key objective in the EnSO project.Although in printed electronics, the PCB board is ususally fabricated with an innovative technology it is often still assembled with bulky and rigid SMD components. In such a case, some of the primary advantages such as conformability and flexibility that are commonly attributed to printed electronics are lost. In order to overcome this limitation, we developed a new package type called “flexible interposer”. It consists of a Cu wiring film fabricated in roll to roll, a thinned IC and a flexible polymeric mould cover. The interposer is designed with a QFN format and is characterized by a reduced thickness and some mechanical flexibility.The flexible interposer approach was developed and characterized for a daisychain chip and a commercial power conditioning IC of the latest generation from STMicroelectronics. The fabrication process was established with the daisychain chip to facilitate electrical characterization and reliability testing and was then adapted for the STBC15 IC. 30 interposer samples have been prepared and characterized. The obtained process yield indicates a robust fabrication process. Since all process steps are compatible with roll to roll production, we expect a high potential for up-scaling that offers the chance to close the gap between research and market.The research results were obtained in the scope of EnSO project that has received funding from 1) EU under Grant Agreement no. 692482 and 2) BMBF with National Grant no. 16ESE0088.

Biography
Erwin Yacoub-George received his Ph. D in Chemistry (1994) at Technical University of Munich where he developed a production process for polysiloxane beads. Since 1994 he worked for the Fraunhofer Society in Munich. He started his research works on the development of optical biosensor systems. In 2002 he joined the flexible electronics team and developed self-assembly processes for thinned ICs as well as heterogeneous integration techniques for printed and large area electronics. He is currently working as a project manager on European and National research projects with a focus on thin chip integration in flexible foil substrates.

Holistic Thermal Material Characterization Approach for Thermal Performance Optimization of Electronic Packages

Tobias von Essen
Head Of Marketing
Berliner Nanotest und Design GmbH

Abstract
Thermal management is a key component of electronic package design in general and heterogeneously integrated System-in-Package design in specific. Functionality, life expectancy and reliability of packages strongly depend on their thermal performance. The application of the right materials is most important to achieve the targets. Furthermore, numerical analysis for lifetime prediction requires correct material data for credible propositions.As material properties strongly depend on use case and field scenario, but material datasheets, unfortunately, tend not to provide the details and accuracy required, it is crucial to acquire material data reliably using suitable methods.The presentation will describe a systematic approach to identify the contribution of different materials in electronic packages to the overall thermal performance and which ones are potential bottlenecks. For the different material classes, different characterization methods are presented and discussed.Thermal interface materials (TIMs) are centerpiece of the discussion, as they contribute with up to two thirds to the overall thermal junction to case resistance. The best approach to TIM characterization is following the ASTM D 5470 guideline, which does not only provide thermal conductivity as output but also the interface resistance, which is a crucial component of thermal interfaces with continuously shrinking gap width.Second important group of materials in the list are metals and semiconductors in the package, all with rather high thermal conductivity and not possible to characterize using the ASTM D 5470 approach. However, a quite similar approach, moving from through-plane to in-plane measurement, will be presented. It allows the precise characterization of such materials and yields thermal conductivity and diffusivity as result, which is gratefully acknowledged input to numerical analysis. The same methodological approach enables the characterization of metal-based die attach materials such as solder and sintered material samples.Eventually, a system-level evaluation method will be shown that can provide performance benchmarking of assembled prototypes and can greatly serve as validation beacon for numerical models.In conclusion, an example of a typical electronic package will be shown, summarizing all presented methods and system-level test. The used complete off-the-shelve product family offering all the presented methods ready to use will be introduced.

Biography
Tobias von Essen studied Micro Systems Engineering and Systems Engineering at the University of Applied Sciences in Berlin, receiving his master’s degree in 2013, where he implemented a test stand for transient thermal characterization. Since 2011, he is part of the Nanotest team, first as student worker and, subsequent to his master’s thesis, as permanent employee. Tobias is responsible for marketing and sales activity at Nanotest, but also leads multiple software projects of Nanotest-proprietary characterization systems and partakes in method and system development. His scientific focus is steady-state thermal material characterization.