Monday, November 12, 2018

Networking Reception

19:30 Restaurant LEHEL
  Karl- Scharnagl Ring 6-8, 80538 München

Tuesday, November 13, 2018
Market Presentation

11:00 Welcome
11:05 TBA
  Research & Statistics, SEMI
Session 1

Flexibility as Key Element for European Manufactures

MEMS – One Product one process?
  Udo Gómez, Senior Vice President, Robert Bosch GmbH
MEMS – One Product one process?
Udo Gómez

Udo Gómez
Senior Vice President
Robert Bosch GmbH

Udo Gómez

The demand and variety of applications for MEMS sensors has been growing steadily since the first series applications in the automotive sector in the early 1990s. Especially since the rise of fast-moving consumer markets, quick and efficient design has become increasingly important. However, in particular for MEMS, the strong interaction of product design and manufacturing processes is a major challenge. The growing number of applications for sensing of various physical and increasingly chemical parameters, often require specific solutions in MEMS production, chip level packaging and component testing as well. Fast and market-driven product development is only possible through innovative design concepts and the provision of modular process building blocks. A deep understanding of the interrelationships and the development of corresponding simulation tools are further key competencies. As market leader in MEMS sensor business and one of the first MEMS pioneers, BOSCH is continuously pushing forward the development of MEMS technology. The extension of our process platform originally defined for automotive applications to consumer products opens up new possibilities in the realization of complex 3D structures. This enables new product designs that are reflected in high-performance sensors for both automotive and consumer electronics applications. The presentation gives a short overview of the different requirements on MEMS technology compared to standard IC design and manufacturing. It provides insights into the future development in the field of surface micromechanics and highlights challenges and solutions of MEMS technology development and manufacturing as well as design methodology. In addition, we give examples of new design and product concepts and finally question: Does the old MEMS law "one product, one process" continue to apply?

Dr. Udo-Martin Gómez Senior Vice President Sensor Engineering, Robert Bosch GmbH Dr. Gómez is Senior Vice President of Robert Bosch GmbH. He is heading the Sensor Engineering at Bosch Automotive Electronics (AE/NE-SE) in Reutlingen, Germany, the world’s largest MEMS supplier serving the Automotive, Consumer Electronics and IoT industry. Having completed his doctorate in physics, Dr. Gómez started his career at Robert Bosch GmbH in 1999 at Corporate Sector Research and Advanced Engineering (MEMS technology). Before joining Bosch Automotive Electronics in April 2018, he worked in various management positions at Bosch and also held the position of Chief Expert for MEMS sensor technology. From 2013 to March 2018, he was Chief Technical Officer of Bosch Sensortec GmbH - a fully-owned subsidiary of Robert Bosch GmbH, responsible for research and development of micro-electro-mechanical sensors (MEMS) for consumer electronics, smartphones, security systems, industrial technology and logistics. Since 2014, Dr. Gómez is Deputy Chairman of the Board of VDE/VDI-Society Microelectronics, Microsystems and Precision Engineering (GMM). Since 2015, he is also member of the GSA (Global Semiconductor Alliance) EMEA Leadership Council.

11:55 LUNCH
12:45 How to Handle Multi Technology Zoo?
  Volker Herbig, Business Unit Manager for the MEMS BU, X-FAB Semiconductor Foundries
Next Generation of Powerful Intralogistics Automation for 200MM Semiconductor Fabs
  Heinz Martin Esser, Managing Director, Fabmatics GmbH
Next Generation of Powerful Intralogistics Automation for 200MM Semiconductor Fabs
Heinz Martin Esser

Heinz Martin Esser
Managing Director
Fabmatics GmbH

Heinz Martin Esser

Existing 200mm semiconductor fabs can master the challenges of a 24x7 production under highest cost and quality pressure by implementing intralogistics automation solutions. In the previous years many companies operating mature fabs understood that older does not mean obsolete and started or continued their journey towards higher automated production. Fabmatics developed a variety of automation solutions in the fields of material identification and tracking, storage, transport and handling. After the first generation of these automation systems entered the fabs, left the prototype level and have been running in production for a couple of years the customer needs and requirements changed. Focused the first material handling automation solutions on general feasibility the trend now develops towards continuous improvement, stability, performance and cost of ownership, which creates new and different challenges for automation suppliers like Fabmatics. In his presentation Heinz Martin Esser will explain the newest trends of customer requirements for automation of mature fabs and how Fabmatics is tackling these challenges by developing the 2nd generation of intralogistics automation systems, which will gives the customers the opportunity to further stretch the current limits of fab performance.

Managing Director of Fabmatics GmbH and President of Silicon Saxony e.V. Heinz Martin Esser, born in 1955, completed his studies of supply engineering at the university of applied science in Cologne with diploma in 1981. In 1985 he got an additional university degree in business administration. He gained a wide experience in detailed engineering and project management for large and complex investments for nuclear industry and beverage and food industry. Later he was assigned as branch manager to build production clean rooms and facilities in semiconductor and pharmaceutical industry. In 1999 he was appointed as CEO of Roth & Rau - Ortner GmbH, Dresden (formerly Ortner c.l.s. GmbH). The company provided automated transport, storage and handling systems, RFID components and special products for cleanroom applications as well as complex systems expertise in AHMS installation and qualified services for the international semiconductor industry. Since the merger of Roth & Rau - Ortner GmbH and HAP GmbH Dresden into Fabmatics GmbH in September 2016, Heinz Martin Esser has been managing the company together with Dr. Steffen Pollack. With Fabmatics Heinz Martin Esser is responsible for “Sales & Marketing”, “Customer Service” and “Administration”. Since 2001 Heinz Martin Esser has been a member of the board of directors of the high-tech network Silicon Saxony e.V. In 2009 he was assigned to be the speaker of the board. Since 2008 he has been a member of the European Advisory Board of the worldwide industry association SEMI as well.

Session 2

Attractive through Organizational Innovation – Sharing Best Practices



What Makes Organizations Innovative and Why Does this Make Manufacturing Attractive?
  Glenn van der Burg, Facilitator and Presenter, People Power
14:05 From Lean Manufacturing to Lean Everywhere
  Olivier Ardesi, Central Manufacturing Lean Program Manager, ‎STMicroelectronics
Poster Session

14:30 Introduction
14:35 Pitches to posters
15:05 Poster session & COFFEE BREAK
15:35 Voting of best poster with lucky draw
Final Keynote



16:10 End