Uwe Hansen
VP Power Component Development
Robert Bosch GmbH

Biography
Uwe Hansen received his PhD in Physics at the Technical University from Munich. He specialized in theoretical semiconductor physics. Uwe started his career at Bosch as a process engineer in the Bosch automotive Waferfab, held various functions within Bosch related to semiconductors and was responsible for advanced packaging for CE and automotive MEMS. Since 2018 he is heading the department for power component and module development at Bosch.

The SiC Power Revolution is Ready for High-Volume Car Manufacturing

Manuel Gärtner
Director
STMicroelectronics

Abstract
Early adopters are already receiving significant quantities of SiC devices as we ramp up for the broader automotive industry. SiC wide-bandgap characteristics enable extraordinary efficiency in EV traction systems, on-board chargers, and DC-DC converters, as well as new applications including climate compressors, fuel cell power DC-DC, and high-speed air compressor pumps.By 2025, most European carmakers will have transitioned to the 800V DC bus domain where the high-voltage efficiency and thermal performance of SiC is even more appealing.The SiC revolution has many strategic implications and we will describe ST's manufacturing and vertical integration initiatives to meet the mounting demand, the ambitious electrification targets of legislators, and the stringent quality requirements of critical automotive applications.

Biography
Manuel Gärtner–Director – Wide bandgap & Electrification–Automotive & Discrete Group - STMicroelectronics Manuel Gärtner joined STMicroelectronics Munich in 1999 and is Director of wide bandgap & electrification for automotive applications. He has worked as a development engineer for smart power products and as a research engineer at the university of Berlin.He has published over 35 articles and conference speeches on automotive power electronics and holds more than five different patents.He is member of the EEHE Scientific Advisory Board, the SIA POWER TRAIN & ELECTRONICS scientific committee for Power Electronics, and he represents STMicroelectronics as principal partner in ECPE.

Paving the Road to Electrification - Approaches to Silicon Carbide epitaxy - Materials and Challenges

Silvio Preti
Global Product Manager SiC
ASM International

Abstract
Epitaxy represents a fundamental step in the realization of silicon carbide devices. The quality of the epitaxial process is in fact one of the determining factors both for the electrical yields of the devices and for their durability. The epitaxial reactor is the main instrument, and it represents the result of decades of development. Silicon carbide epitaxy brings with it several unique challenges, long known in research and development but only recently proven in industrial volume production. The need to face and solve these challenges has led the world's few manufacturers of epitaxial reactors to take significantly different directions of development. Some important criteria in the design of the reaction chamber of an epitaxial reactor are by way of example the relative direction of the gas flow relative to the wafer, the temperature of the walls, as well as the number of wafers processed per cycle. The solid, liquid and gaseous materials inside the reaction chamber hold a delicate balance and allow to safely reach the high temperatures typical of this process. The purpose of the presentation is to illustrate the main challenges related to epitaxy on Silicon Carbide and to retrace the most common choices adopted today on the market. The focus is on the key performance indicators used in epitaxy selection – namely device yield, cost of ownership and footprint density driving customer equipment choice.

Biography
Silvio Preti - born in Milan in 1990 - graduates in 2015 from Polytechnic of Milan (Bachelor in Mechanical Engineering and Master’s Degree in “Turbomachinery and Internal Combustion Engines). In the same year he joins LPE as a mechanical designer. Immediately after the SiC business undergoes a sudden and tremendous growth, and within LPE the need to respond to the growing demand with an adequate product becomes evident. Silvio Preti is then assigned the management of the engineering department, a function he holds for 5 years before dedicating himself completely to product development. Following the acquisition by ASM, he holds the position of Global Product Manager for SiC epitaxial reactors.

Radiation Hardness of SiC TrenchMOS Devices for Automotive Applications

Stephan Schwaiger
Automotive Electronics
Robert Bosch GmbH

Abstract
The lecture will investigate the cosmic radiation hardness of SiC TrenchMOSFET devices. It will sum up the effect of cosmic radiation on SiC power devices and the way of characterizing the cosmic radiation hardness. We will point out guidelines to improve the cosmic radiation hardness of devices and a method to estimate it in early computational design. Furthermore, we present our experimental results of the investigation of the cosmic radiation hardness of SiC TrenchMOSFET devices. Finally, we will evaluate on the results with respect to the operation of the devices in a traction inverter for electric vehicles in different operations modes.

Biography
Stephan Schwaiger studied physics at the university of Hamburg and finished with a doctorate degree in 2012. He started in semiconductor industry in Bosch’s central research department working power semiconductors. Since 2015 he works on the development of SiC semiconductors for the section Automotive Electronics at Bosch focusing on technology and device development.

Business Benefits of SmartSiC™ Unrivaled Technology for SiC in Automotive

Emmanuel Sabonnadière
SVP Division Automotive & Industrial
Soitec

Abstract
Coming Soon

Biography
Since July 2021, Mr Sabonnadiere is Senior Vice-President of the Division Automotive & Industrial ofSoitec. He is also in charge of the Strategic Program SiC.From September 2017 to July 2021, Mr Sabonnadiere was CEO of CEA-Leti, one of the mostinnovative Labs in the industry of microelectronics and biotechnology, based in Grenoble (France).Previous two years, Mr Sabonnadiere was CEO & Chairman of the Business Group Professional ofSignify, former Philips Lighting (Amsterdam). From 2014 till 2016, he served as Senior Associate ofMidCap Private Equity firm named Gimv (Paris, Antwerpen, Munich, Den Haag).Previously in his career, Mr Sabonnadiere was CEO & Chairman of General Cable Europe & Africa(Barcelona). From 2005 till 2008, he was CEO of NKM Noell Gmbh, the German branch of the groupREEL. Mr Sabonnadiere was vice-president of the Distribution Transformers division of Alstom T&Dfor 5 years. He began his career in 1992 with Schneider Electric holding various positions includingthat of Managing Director of equipment units for 10 years.Mr Sabonnadiere has a strong innovation and technological background combined with a successfulbusiness track record over decades and some key innovations adopted into the markets. With 30+years of executive leadership of large operations, he produced high level performances of operatingmargins & results and generation of cashflow. He gained a sound experience of change managementin large multi-cultural organizations to adapt to new markets conditions and dynamics in European andInternational environments. He designed and set-up ambitious strategic plans including some merge &acquisitions.Mr Sabonnadiere believes in operational excellence, innovations in technology, talents managementand enthusiasm in leadership. His sound experience in the European industry make him a highlyknowledgeable and respectful Board member.Mr Sabonnadiere obtained a PhD in physics (France), and an engineering degree in InformationTechnology (France). He holds an MBA (France)Mr Sabonnadière is a fully qualified instructor at the ski school in Les Ménuires, and member of theAdvisory board of IAC Consultant and Sparring Capital firm.

Uwe Hansen
VP Power Component Development
Robert Bosch GmbH

Biography
Uwe Hansen received his PhD in Physics at the Technical University from Munich. He specialized in theoretical semiconductor physics. Uwe started his career at Bosch as a process engineer in the Bosch automotive Waferfab, held various functions within Bosch related to semiconductors and was responsible for advanced packaging for CE and automotive MEMS. Since 2018 he is heading the department for power component and module development at Bosch.