Tuesday, October 6, 2015
Agenda
Chair Michael Arnold, Managing Director, PEER Group GmbH
Michael Arnold

Michael Arnold
Managing Director
PEER Group GmbH

Biography
Dr. Michael Arnold, Managing Director PEER Group GmbH, has over 25 years industrial experiences in high-technology areas.
From 1981 - 1986 he studied Physics at the Friedrich-Schiller-University in Jena, Germany, where he obtained his PhD in 1994.
Based on his history in different industrial sectors, Michael gained broad experiences in system simulations, software design and development, optical inspection systems, and device development for aerospace technology.
Michael has been involved with factory automation software solutions for the semiconductor and solar industry since 2001 when he became Operations Manager of TRW and later in 2003 Managing Director of PEER Group GmbH in Dresden.

13:30 Introduction
13:35
Organization and Goals of the Industry 4.0 Platform
  Thomas Schulz, Channel Manager Central and Eastern Europe, GE Intelligent Platforms GmbH
Organization and Goals of the Industry 4.0 Platform
Thomas Schulz

Thomas Schulz
Channel Manager Central and Eastern Europe
GE Intelligent Platforms GmbH

Abstract
The term 'Industry 4.0' was introduced the first time in Germany at the Hanover fair in 2011 and is a central focus of the Federal Government's Digital Agenda. It is supporting and promoting the digitization of industry and has the potential to bring about profound transformation to efficient factory manufacturing.

The implementation strategy forms the basis for all future work. It not only records the research agenda that has been pursued to date, but also lays out core components of 'Industry 4.0'. Given the complex and broad starting point of the platform work nowadays, a framework is to be established that allows for 'Industry 4.0' reference architecture to developed - a set of parameters that can be used in order to press ahead with digitization and comprehensive networking in production.

The substantive work of the platform is initially being undertaken in five working groups (reference architecture, standardisation / research and innovation / security of networked systems / legal framework / labour, training). The platform's governing body includes Economic Affairs Minister and Research Minister as well as representatives from business, science, and trade unions. This presentation is intended to provide an introduction to the platform 'Industry 4.0', its potential, on opportunity and restrictions.

Biography
Thomas Schulz has a Master of Science degree in engineering technology. He has many years' experience in manufacturing organization and process automation with a number of printed publications and presentations. He is currently employed by GE (General Electric) Intelligent Platforms division and is responsible for GE Partner business covering Central and Eastern Europe.

Since 2013 he has been a member of the Working Group covering reference architecture and standardization of the platform 'Industry 4.0' - the strategic initiative and high-tech strategy of the Federal Republic of Germany. He has been actively participating, as part of a team of authors, working on Chapter 6: Reference architecture, standardization and standardization of the implementation of the strategy for the 'Industry 4.0' results report.

14:10
Cyber-Physical-Production-Systems at the BTU Model Factory
  Ulrich Beger, Chairholder, Brandenburg University of Technology Cottbus-Senftenberg
Cyber-Physical-Production-Systems at the BTU Model Factory
Ulrich Beger

Ulrich Beger
Chairholder
Brandenburg University of Technology Cottbus-Senftenberg

Abstract
Recently, significant efforts are under way in the development and implementation of Cyber Physical Production Systems (CPPS) by exploiting fast and highly connected production systems and combining them with novel industrial communication and control strategies. This paper addresses the need for reconfigurable approaches in production planning, logistics as well as in Manufacturing Execution Control (MES) to address induced complexities under the umbrella of Open Innovation and Industry 4.0. A fast reconfigurable and adaptive production monitoring and control approach has therefore been proposed in several industrial application sectors. It encompasses the configuration of manufacturing setups to enable co-development in a distributed production environment, exploiting ICT technologies to produce mass customized products and eventually presents advanced human-robot-collaboration systems. The methodology and physical building blocks and components are being tested and validated in several research and development projects related to open innovation and factories of the future.

The following application results will be presented:
1. Semi-automated handling of complex geometries in hazardous environments,
2. Laundry logistics and shop-floor automation in conjunction with RFID systems,
3. Production of small lot sizes, in particular assembly processes, assisted by human-robot interaction.

In addition, the recently established Model Factory at the BTU (Chair of Automation Technology) is introduced. It assembles all elements of development, production and maintenance of industrial equipment and products. As a result, different implementations and production scenarios can be tested and validated in the experimental environment under real conditions. Newly developed CPS components can be integrated for validation purposes and industrial pilot cases can be analyzed in a more time and capacity efficient manner.

Biography
Prof. Dr.-Ing. Ulrich Berger


Professor Dr.-Ing. Ulrich Berger studied mechanical engineering at the University of Stuttgart. From 1984 to 1990 he assumed various management responsibilities in research, development and applications engineering at the Robert Bosch Group, Stuttgart. Afterwards he was appointed as technical director at the BIBA institute Bremen and from 1995 to 1998 chief engineer at the Institute of Material Science, Bremen (IWT). He received his doctorate at the University of Bremen in 1995 under the supervision of Prof. B.E. Hirsch. Title of thesis: "Automated robot systems for one-of-a-kind manufacturing". In 1998 he was appointed as professor for manufacturing systems at the Lüneburg University. In October 1st, 2001, Professor Berger was appointed as Chair of Automation Technology of the Brandenburg Technical University Cottbus.
From 2003 to 2007 he held the office of the Dean in the Faculty of Mechanical, Electrical and Industrial Engineering at the BTU. In 2005 he was awarded the Science Ambassador of the State of Brandenburg. Since 2008 he also is guest professor at Denmark's Technical University (DTU) in the field of manufacturing engineering. In September 2012, he was appointed by the Minister of Economic Affairs of the Land Brandenburg to spokesman for the country's metal cluster. In April 2013 he was elected as Chairman of the National Federation of Regional Association of Berlin-Brandenburg by the Association of German Engineers (VDI). He was Chairman of the VDI district association for 6 years. Professor Berger is also a member of several technical and scientific societies in Germany and abroad.

14:45
The Right Security for the Internet of Things
  Juergen Spaenkuch, Division Vice President Chip Card & Security (CCS), Infineon Technologies AG, Infineon Technologies AG
The Right Security for the Internet of Things
Juergen Spaenkuch

Juergen Spaenkuch
Division Vice President Chip Card & Security (CCS), Infineon Technologies AG
Infineon Technologies AG

Abstract
Data Security and system integrity are prerequisite for successful implementation of Industry 4.0, the application of "Internet of Things" (IoT) concepts and technologies in industrial settings. Especially, as with smart factories and connected industrial production, economical assets such as machinery, Intellectual Property as well as product and service quality are at stake and hence the overall competitive ability of the business itself. For example, advanced factory automation uses networking to integrate the entire supply chain from supplier to customer to enabling Lot-Size-1 or customized production. In such a connected environment, identity of machines and personnel must be verified and communications must be protected end-to-end to make sure that system integrity is maintained. Therefore, all elements of the system from customer to supplier must be identified and secured adequately to protect systems and components from unauthorized access, attacks, fraud and sabotage.

Several attempts have been made in the past to apply purely software-based security solutions. Unfortunately, software - due to its nature - bears several significant weaknesses. Software is written code, and code can be read and analyzed. And once it is analyzed, it can be modified to the requirements of an attacker and system integrity can be broken.

However, software can be protected by hardware: hardware protects the processing and storage of code by using encryption, fault and manipulation detection, and by providing secure data storage. This has been proven by extensive experience from the areas of trusted computing and the use of secure elements in mobile phones. Following the same principles, hardware-based security tailored to industry-specific requirements provides a trust anchor for digitized and connected industrial production and helps to secure physical as well as intellectual property.

Biography
Juergen Spaenkuch
Division Vice President
Chip Card & Security (CCS)
Infineon Technologies AG

- born on April 22, 1969
- in Rastatt, Germany
- married, 2 children

Juergen Spaenkuch studied at the University of Applied Sciences in Karlsruhe from
1991 to 1997 and holds a Master degree in informatics.

He started his professional career at Siemens AG in the Memory Products division of
the semiconductors business unit, which later became Infineon Technologies AG.

In the years thereafter, Mr. Spaenkuch held various positions in logistics, technical
marketing and product management and also had managerial responsibilities for the
Automotive and Chip Card Divisions of Infineon.

In 2008, Juergen Spaenkuch became the head of the Embedded Security product segment of the Chip Card Division.

Since July 1, 2011, he is the Vice President and General Manager of the business line Platform Security within the Chip Card & Security (CCS) Division.

15:20
Technical Visions of Industry 4.0
  Joachim Seidelmann, Head of Competence Center "DigITools", Fraunhofer IPA
Technical Visions of Industry 4.0
Joachim Seidelmann

Joachim Seidelmann
Head of Competence Center "DigITools"
Fraunhofer IPA

Abstract
With the introduction of IoT (Internet of Things) technologies and CPS (Cyber-Physical Systems) to the manufacturing domain, the integration of real and virtual worlds along the whole value chain will reach the next level. In order to seamlessly support and integrate innovative business processes on the shopfloor, as well as to enable new, possibly disruptive business models, highly agile manufacturing infrastructures have to be developed and implemented. This will affect all involved stakeholders such as equipment manufacturers, software vendors, and manufacturers.
Several generic use cases are already implemented in the context of Industrie 4.0, but it has to be discussed how the semiconductor industry can benefit from the Industrie 4.0 initiative, and how it can maintain its role as innovation driver in the area of manufacturing technologies.

Biography
Joachim Seidelmann obtained his diploma degree in mechanical engineering at the University of Stuttgart in 1996. Subsequently he worked as research assistant in the area of IT-Systems for High-Tech manufacturing industry at the Fraunhofer IPA.
Since 2000 he was in charge of the research team "Logistics and Production-IT for the semiconductor industry".
In 2012 he started additionally building up the Competence Center "Digital Tools in production" with a strong focus on Industry 4.0 concepts and solutions.
He is co-author of the "Recommendations for implementing the strategic initiative INDUSTRY 4.0 - Final report of the Industry 4.0 Working Group" and responsible for several large Industry 4.0- projects.

15:55
Connecting things and services. How Industrie4.0 increases the benefit of automation at the Bosch 200mm-Waferfab
  Thomas Schuler, project manager, Robert Bosch GmbH
Connecting things and services. How Industrie4.0 increases the benefit of automation at the Bosch 200mm-Waferfab
Thomas Schuler

Thomas Schuler
project manager
Robert Bosch GmbH

Abstract
After a brief overview over the Bosch-RtP1-Plant in Reutlingen the presentation will show how highly automated production areas benefit from Industrie4.0 methods. An example will be shown how connection of things and services enables highest throughput of production tools as well as an extended usage of a transport system. A second example will highlight a modular automation concept that has been developed by using local intelligence instead of global logistics-management. Modularity ensures a simple rollout of high-automation in an existing fab-environment.

Biography
Dr.Thomas Schuler started his industrial career in 1998 at Robert Bosch GmbH after he recieved a doctorate degree in Physics from University of Stuttgart. Several years later after working on different positions in wafer production he entered the field of high automation in the 200mm Wafer Fab, where he is in charge of many automation solutions implemented at the Bosch-Wafer-Manufacturing site.

16:30
InterfaceA: Candidate for Industry 4.0? Adoption and Challenges in Semiconductor Industry
  Ingo Kuehn, MTS Design Engineer, GLOBALFOUNDRIES
InterfaceA: Candidate for Industry 4.0? Adoption and Challenges in Semiconductor Industry
Ingo Kuehn

Ingo Kuehn
MTS Design Engineer
GLOBALFOUNDRIES

Abstract
Smart communications between production equipment and factory IT solutions is a key element of
Industry 4.0. Starting in the 1980's, the semiconductor industry developed SECS (SEMI Equipment
Communications Standards) and related EStandards
which are widely implemented in semiconductor
front end production factories and in the solar industry. A subset of the standards categorized as
InterfaceA
is a relatively new SEMI Equipment Data Acquisition (EDA) set of standards built on
nonproprietary
Web technologies. It provides a more flexible interface between production equipment
and factory IT solutions and improves some data collection limitations of the existing SECS/GEM
(Generic Model for Equipment & Control of Manufacturing Equipment) interface.
This presentation introduces InterfaceA
featuring a comprehensive selfdescriptive
capability. Major
differences compared to SECS/GEM communication will be highlighted. As with many other new
technologies, InterfaceA
has not been spared from its own challenges which last even until today. At
GLOBALFOUNDRIES selected InterfaceA
vendor deliverables lag behind expectations for meeting
factories full production ramp capability, to include InterfaceA
reliability. In part, this may be due to
the fact that a comprehensive and widely accepted InterfaceA
test suite has not been available at
least
not in a comparable scope as to what was available when SECS/GEM and 300mm automation standards
were ramping in the Semiconductor Industry. Consequently we will touch on GLOBALFOUNDRIES'
InterfaceA
test methodology and associated test software with examples of common problems found.
A discussion of current data collection and equipment control challenges in semiconductor industry and
an outlook on a broader application will summarize the presentation.

Biography
Authors:
Ingo Kühn
Olaf Zimmerhackl

Mr. Ingo Kuehn studied Technical Cybernetics and Automation at TU Chemnitz, receiving a Master degree in 1991. He continued his studies at Tampere Technical University, Finland in the Digital Signal Processing Lab at Prof. Yrjö Neuvo. He worked in the Telecommunication area, developing DSP software for the first UMTS mobile network at NOKIA Telecommunication, Oulu. From 2000, he works for AMD Dresden, later Globalfoundries Inc. first in the field of Digital Design Verification. From 2010 he started working in the Automation department. Currently, he is responsible for development of Equipment Interfaces and supports the ACM team. Mr. Kuehn holds three patents in the Digital design and verification area.

Olaf Zimmerhackl received his Diplom-Ingenieur in electrical engineering from Dresden University of Technology in 1997. He is member of the Technical Staff Factory Automation Engineer and is Program Lead for Automation Capabilities Management (ACM) at GLOBALFOUNDRIES Fab 1 in Dresden.

17:00 END